Yamaha FS-TA-RR (TransAcoustic)

Yamaha FS-TA-RR (TransAcoustic) Raspberry Red (Ruby)

The Yamaha TransAcoustic Guitar recreates that incredible experience without needing any external amplification or effects, just the guitar itself. It’s the most inspiring, engaging acoustic guitar you’ve ever played.


Concert Body
Solid Spruce Top
Mahogany Back & Sides
Amazing sounding reverb/chorus built-into the guitar with no need for external amplification or effects
New scalloped bracing for louder, richer acoustic sound

Yamaha FS-TA-VT (TransAcoustic) Vintage Tint

An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings. The vibrations of the actuator are then conveyed to the body of the guitar, and to the air in and around the guitar body, generating authentic reverb and chorus sounds from inside the body.

Simple Controls
Three simple knobs let you adjust the degree of effect applied and the line-out volume level. Additionally, keeping the controls small minimizes the area of the holes in the body material, reducing acoustic sound loss.

(A) Chorus Control
(B) Reverb Control (Room / Hall)
(C) TA Switch / Line Out Volume Control

* Pressing the TA Switch for more than 0.3 seconds activates the TA function.

* When a cable is connected to the line-out jack, the line-out volume can be adjusted by rotating the (C) knob.

* The reverb type switches from Room to Hall around the 12:00 position.

Designed to Provide Superb Acoustic Guitar Sound
The body is a solid top guitar based on the FG-series.

Louder and stronger sound in the low to mid-ranges, thanks to cutting-edge acoustic analysis technology developed by the Yamaha R&D Division.

This analysis led to the development of the new scalloped bracing pattern, a new and ideal acoustic structure that maintains the durability of the top board while bringing out the most sound the Yamaha FG-TA has to offer.


Shape: Concert
Top: Solid Spruce
Back & Sides: Mahogany
Bridge: Rosewood
Bridge Pins: Black ABS w/ White Dot
Bracing: Scalloped X Brace
Body Finish: Gloss
Soundhole Inlay: Black + White
Pickguard: Transparent
Binding: Cream
Colour: Raspberry Red (aka Ruby Red)

Neck Material: Nato
Neck Finish: Matt
Fingerboard Material: Rosewood
Scale Length: 634 mm
Fingerboard Radius: 400 mm
Nut Material: Urea
Nut Width: 43 mm

Hardware Finish: Chrome
Tuning Machines: Die-cast Chrome (TM29T)
Electronics: SYSTEM70 TransAcoustic + SRT Piezo Pickup
Controls: Reverb/ Chorus/ TA Switch/ Line Out Vol

Body Length: 497 mm
Total Length: 1021 mm
Body Width: 380 mm
Body Depth: 90-110 mm

Case/GigBag: Not Included